top of page

ZANDAIR 100C CLEAN AIR (for IVF)

As technology has advanced, the necessity to filter air has become even more important....

 

  • The key to effective air filtration of damaging volatile air compounds is in the Photocatalytic Oxidation. The chemical compounds becomes highly reactive when exposed to a specific wavelength of ultraviolet light.

  • The photo-catalyst attracts pollutants and converts them into benign compounds such as water (H2O) and carbon dioxide (CO2). The catalyst is such that it does not wear out or lose its effectiveness as a result of its actions.

ZANDAIR™ 100C Four Step Air Purification Process

STEP ONE: Adsorbs Toxic Chemicals and Gases
  • The front position Activated Carbon Filter with specially formulated gas adsorption media (including zeolite and potassium permanganate) adsorbs automobile exhaust fumes, organic hydrocarbons, formaldehyde from particle boards used in construction, paint, solvents, chlorine, cleaning chemicals, volatile organic compounds (VOCs), chemically active compounds (CACs) and other harmful agents.

STEP TWO: Hospital Grade HEPA Filter Removes Micro-Particles
  • A Back-Position Hospital Grade HEPA Filter individually tested by the supplier and certified to remove particles of 0.3 µm with not less than 99.97% efficiency by an approved aerosol.

  • Pollen, mould, fungal spores, dust mites, and bacteria are examples of micro particles.

STEP THREE: Photocatalytic Oxidation Destroys Toxic Chemicals and Eliminates Odours
  • Photocatalytic Oxidation converts toxic malign compounds (even carbon monoxide and nitrous oxide) into benign constituents such as water (H2O) and carbon dioxide (CO2).

  • The catalyst is such that it does not wear out or lose its effectiveness as a result of its actions.

STEP FOUR: Ultraviolet Light
  • Ultraviolet light attacks the molecular structure of viruses and bacteria, which are too small to be filtered out by the HEPA filter, thus rendering them harmless.

  • Ultraviolet light converts VOCs and CACs into H2O and CO2. Ultraviolet light technology combined with Photocatalytic-Oxidation is an important and unique feature of this air purification / filtration system.

zand-air-100P-300x286.png
Components:

The ZANDAIR™ 100C air purification system consist of the following:

​

  • Air inlet grill with safety locks

  • Activated carbon filter, which adsorbs toxic chemicals and gases,

  • Hospital grade HEPA filter individually tested by the supplier and certified to remove particles of 0.3 um with not less than 99.97% efficiency by an approved aerosol

  • Photocatalytic oxidation chamber

  • High output UVC lamp

  • High efficiency low noise reversed curved motorized impeller with sealed ball bearings.

100C-unit-exploded-view2.jpg
ZANDAIR 100C Technical Specifications:
Dimensions :
Weight:
21.5"w X 18"h X 8"d (55cm X 46cm X 20cm)  
 23 lbs. (10.43 kg) 
Max Air Flow:
 265 CFM /7.5 m3 per minute
Max Watts:
Voltage:
Blower:
Catalyst:
 110 watts 
120v - 60hz /220v - 50hz
 Reversed - curved motorized impeller 
 Metal oxides 
U.V. Range:
254 nm (produces no ozone) 
Gas Adsorption:
Activated carbon media
Application:
1,000 Cubic feet max./ 29 cubic meters
Service:
U.V. Lamps -1 year, Filters - 6 months
Particle Filter:
0.3 micron HEPA
bottom of page